View Sidebar
Kingmax presents its memories DDR4

Kingmax presents its memories DDR4

October 7, 2014 12:59 pm0 comments

Kingmax has announced the production of its new series of DDR4 memory, available soon in all formats: Unbuffered DIMM, SO-DIMM, registered DIMM, ECC unbuffered DIMM and VLP registered DIMMS.

Responding to the market trend, Kingmax will commercialize the DDR4 at four speeds: 1866/2133/2400/3200 MHz and in three capacities of individual modules: 4, 8 and 16 Gbytes.

Kingmax ddr4

The voltage of all modules will be 1.2 volts while latency CL13 goes to cl24(model:sc7e) on memories of more performance (3,200 MHz) offering a spectacular bandwidth of 25.6 GB/s. Price of this memory which will be on the market at the beginning of 2015 is not yet available..

As you know, DDR4 is an evolution of the current DDR3 offering a higher performance, greater reliability and lower consumption. Performance increase will be of 30 percent since it will work with designated frequencies of up to 3200 MHz. 1.2 permitted voltages, 1.05 to 1.1 volts, DDR4 also stands out for its lower consumption against the 1.5 volt standard of the DDR3, which will allow to increase the autonomy, a key aspect for the mobile sector.

In addition, these memory modules allow devices to have independent activation, writing, reading or refreshment of information operations, and all of these operations will be autonomous according to groups with memory banks, something that will improve the efficiency and performance of this development. DDR4 need new motherboards since it is incompatible with all of the above.

Leave a reply